Glo-Protek HB Silicon Coating-119
Glo-Protek HB Silicon Coating-119 is a single pack silicon alkyd based semi-glossy U.V. resistant topcoat
Suggested Uses
Glo-Protek High Built Silicon Coating-119 known for its excellent gloss and colour retention is ideal for use as a topcoat to any painting system (viz. Alkyd, C.R. or Epoxy) on boot-top, topside, decks, superstructure and other locations on the above water area exposed to weather. When dried the coating provides a film resistant to severe marine conditions
Technical Data
| Colour | As required |
|---|---|
| Finish / Sheen | Semi-glossy |
| Flash Point | > 30ºC |
| Volume Solids | 54% ±2 |
| Recommended DFT | 35-40µ per coat (Two coats). |
| Theoretical Covering | 12 M2 at 40µ |
| With 30% Loss | 8.4 M2 |
| Method of Application | Brush / Roller / Airless / Con. Spray |
| Airless Spray | Tip size: 0.017"-0.021" Fluid Pressure : 2500-3000 psi. |
| Drying Time | Surface Dry : 1 hours Tack Free : 2-3 hours Hard Dry : Overnight |
| Overcoating Interval | Overnight |
| Thinner Recommended | Glo-Protek G.P. Thinner |
Surface Preparation
Ensure surface to be coated is free from all contaminants and is suitably primed
Blast clean new steel surfaces to Sa 2½ prime with Glo-Protek Lpoxy Surface Tolerent Primer-701
Shelf Life
12 months from the date of manufacture
Packing
20 Liters