 |
Glo-Protek Rust Converter - Marine & Industrial Grade
GPRC is a water- based, eco- friendly, non- acidic, non-toxic, neutral pH, protective base /primer coat utilizing high end polymer technology for sheet metals and other steel products used in Industrial and Marine environment. |
|
Glo-Protek EPoxy Mio 505HB Inetermediate Coat
Two-component, High Build intermediate composition containing Micaceous Iron Oxide (MIO) pigment. Recommended as an intermediate coat in protective coating system. |
|
| |
|
|
|
|
|
| |
|
|
|
|
|
 |
Glo-Protek Rebar Protective Coat
Highly recommended coating system in present Reinforcement steel Bars. Add decades to the life of R.C.C. rebar and structural steel innovatively and easily. No elaborate surface treatments required.
|
|
Glo-Protek HB PU Coat 1673
High-build, two component, high solid, acrylic polyurethane coating. Offers excellent resistance to atmospheric exposure conditions. Resistance to water and saline atmosphere, splash and spillage of mild chemicals. Gives tough and abrasion resistant finish on curing. |
|
| |
|
|
|
|
|
| |
|
|
|
|
|
Glo-Protek ToughEx 229
Single pack, air-drying, Oleo-Resinous and Alkyd based coating specially designed paint which offers a tough & hard wearing coating resistant to abrasion, resistance to corrosion, fresh water, diesel oil, splashes of petrol, lubricating oil etc. |
|
Glo-Protek PU Aliphatic Coat 1637
Two component, acrylic aliphatic polyurethane coating. Offers excellent gloss and colour retention. It is used for subtracts as steel, aluminum, glass-fiber, plywood etc. |
|
| |
|
|
|
|
|
| |
|
|
|
|
|
Glo-Protek Rust Remover 197
Removes any degree of rust from steel components, machined surfaces of cast iron, forged components, reinforcement steel rods, couplers, slotted angles, ERW tubes etc. |
|
Glo-Protek Aqua PU Finish
Single pack, fast drying, hygienic, water based polyurethane Coating. |
|
| |
|
|
|
|
|
| |
|
|
|
|
|
Glo-Protek Rust Descaler-HB
Hydrochloric Acid based highly active cleaning agent and descaler, blended with corrosion inhibitors and wetting agents. It has a special film forming inhibitor to protect carbon steel, copper, and brass against acid attack. This inhibitor also helps to enhances the effectiveness of the acid. |
|
 |
Glo-Protek Zero Salt 121
Salt Remover / Flash Rust Inhibitor prevents flash rusting of wet abrasive- and water-blasted iron and steel surfaces and of dry blasted surfaces in a pressurized wash down. It also removes chlorides and other salts and contaminants very effectively. Concentrate dilute 1:100 with water
|
|
| |
|
|
|
|
|
| |
|
|
|
|
|
Glo-Protek B30HB Bituminous Anti-Corrosive Coat
High-build, resin-modified bituminous anti-corrosive coating for steel protection.
Also suitable for concrete-cement surface. |
|
 |
Glo-Protek Rustop 133
Clear Rust Preventive Solution- is a single pack, air-drying, Polyvinyl Butyl and light phosphatising treatment offering light phosphatising without involving many tanks, water and heating equipments. |
|
| |
|
|
|
|
|
| |
|
|
|
|
|
Glo-Protek EPoxy 1403 HB Top Coat
High performance high-build, anticorrosive, higher dft epoxy coating offers weather resistance to withstand sea water, chemicals and major environment condition. |
|
 |
Glo-Protek High-Perf. modified Tar Epoxy Coating
High-build, 2 component, water resistant, high performance
anticorrosive metal surface encapsulating.
|
|
| |
|
|
|
|
|
| |
|
|
|
|
|
Glo-Protek EPoxy Finish Coat 512
Epoxy Finish Paint is two-component, polyamide adduct cured, General Purpose Air drying Epoxy Coating.
Its Excellent substitute to Enamel. |
|
Glo-Protek RainShield Coat
For Strong Construction & Waterproofing
Acrylic based elastomeric waterproof coating. After drying it forms a film of exceptional strength and flexibility that prevents peeling, fungi / algae growth, future cracks and water seepage. GRC bridges bigger cracks effectively and it is UV resistant. |
|
| |
|
|
|
|
|
| |
|
|
|
|
|
 |
Glo-Protek HB PU Coat 1673
High-build, two component, high solid, acrylic polyurethane coating. Offers excellent resistance to atmospheric exposure conditions. Resistance to water and saline atmosphere, splash and spillage of mild chemicals. Gives tough and abrasion resistant finish on curing. |
|
|
|
|
| |
read more |
|
|
|
|
