Glo-Protek HB Zinc Chromate Primer-M-100
Glo-Protek HB Zinc Chromate Primer-M-100 is a general purpose High Built primer as per IS:2074 standard based on special synthetic Resin medium with anticorrosive pigments (viz. Red Oxide, Zinc Chromate & Zinc Phosphate). Recommended for use on above water area of ships like Boot top, topside, decks, superstructures, cargo holds, etc. can be over coated with a wide range of Synthetic Enamel finishes.
Technical Data
Colour | Red / Yellow / Grey |
---|---|
Finish / Sheen | Matt to Egg-shell |
Flash Point | > 30ºC |
Volume Solids | 44% ±2 |
Recommended DFT | 40µ |
Theoretical Covering | 11 M2 per ltr at 40µ |
With 30% Loss | 7.7 M² per ltr |
Method of Application | Brush / Roller / Airless / Con. Spray |
Airless Spray | Tip size: 0.014"-0.024" Fluid Pressure : 2000-3000 psi. |
Drying Time | Surface Dry : 1 hours Hard Dry : Overnight |
Overcoating Interval | Overnight, No Maximum |
Thinner Recommended | Glo-Protek G.P. Thinner |
Surface Preparation
Degrease and blast clean to Sa 2 ½. If blast cleaning is not possible follow manual/mechanical means, e.g. Chipping scarping, wire-brushing, power tool cleaning etc. to remove all rust, scale, loose particles, contaminants, etc. Ensure removal of weld spatters, seams and sharp edges. Dry off and paint.
Shelf Life
12 months from the date of manufacture
Packing
20 Liters
Precautions
Ventilate the area to be painted thoroughly to avoid suffocation while application.