Glo-Protek Marine TBT Free CR Antifouling Coating
A high strength high performance Antifouling paint based on specially designed synthetic resins exhibiting good film strength and abrasion resistance. The film is tolerant to atmospheric exposure and shows good adhesion to most underwater priming systems including Coal Tar Epoxy. Controlled leaching, No settling on prolonged storage.
Product is TBT Free
Glo-Protek Marine TBT Free CR Antifouling Coating is Organotin-Free. It is conforming to the IMO AFS Convention & Regulation (EC) No. 782/2003 and having Class Approval from M/s. RINA Services S.P.A. under ‘Anti-Fouling Paint Statement 2011XI286’
TECHNICAL DATA :
Colour | Red |
---|---|
Finish | Semi-glossy |
Flash Point | > 25ºC |
Volume Solids | 52% ± 2 |
Recommended DFT/COAT | 50μ per coat |
Theoretical Covering | 9.20 M²/ltr. at 50μ |
Mode of application | Brush / Roller /Airless/Con. Spray |
Airless Spray | Tip size : 0.021" – 0.026" & Fluid Pressure : 2500 –3000 psi. |
Drying Time | Surface Dry : 30 minutes & Hard Dry : 6 hours |
Thinner | Thinner for HPAF |
Overcoating Interval | 6 hours minimum, 24 hours Maximum |
Shelf Life | 6 months |
Surface Preparation
Base coating should be free from all contaminants and overcoated within the specified overcoating time.
Packing
20 Litres.
Health & Safety
Use rubber hand gloves and safety goggles while handling this material. Normal PPE can be used. As a general rule, avoid inhalation of solvent vapour or paint mist and contact of paint with skin and eyes. Provide forced ventilation when working with solvent born coating in confined spaces or stagnant. Skin and eye protection follow the local and national regulations.