Glo-Protect PU Aliphatic Coat 1637

Two-component, Acrylic Aliphatic Polyurethane Coat

Glo-Protek PU Aliphatic Coat 1637 is a two-component, acrylic aliphatic polyurethane coating having an excellent gloss and color retention. It has excellent resistance to water, chemicals, impact, abrasion and industrial corrosive atmosphere.

It is used for a variety of substrates such as steel, aluminum, glass-fiber reinforced polyester, plywood, where light fastness and gloss retention is desired as an excellent finish coat.

TECHNICAL DATA

Colour Range
Finish High glossy
Volume Solids Approx. 45%
Recommended DFT/COAT 25 - 35 microns
Mixing Ratio 4 : 1 by volume
Pot Life 4 - 5 hours (30ºC)
Nozzle Orifies 0.017 - 0.019 inch
Theoretical spreading rate 18.00 - 12.85 m /l at above DFT
Surface Dry 1 hours at 30ºC
Hard Dry 16 hours
Fully cured 7 days at 30ºC
Overcoating Interval Min: 16 hours; Max: 7 days
Flash point 27ºC
Thinner PU thinner

Surface Preparation

The substrate surface/previous coat should be dry and free from all surface contaminations. The indicated maximum re-coating interval refers to over-coating with itself. Suitable Epoxy Primer/ Inter coat surfaces should be dry and free from dirt, dust etc before top-coating with Glo-Protek PU COAT 1674. However, if applied over old painted surface, then the substrate surface should be roughened sufficiently before applying the coat.

Method of Application

By Air Spray, Airless Spray, Brush

Standard Packing

20-litre drums

Storage:

Store in a cool, dry place

Health & Safety

As a general safety precaution, care should be taken to avoid contact of liquid paint with skin and eyes, and i confined spaces nhalation of solvent vapours or paint mist should be avoided. Air movement should be ensured with proper forced ventilation when applying the paint in . Skin, eye and respiratory protection is always recommended at all times while coating.