Glo-Protek Synthetic Zinc Chromate HB Primer
This is a single pack, air-drying, High Built Oleo-Resinous based primer with anti corrosive pigment and zinc chrome pigment
TYPICAL USE
General purpose / Anti-corrosive primer. Suitable for industrial atmospheric conditions having mild corrosive environments. Specially recommended for LPG Cylinders
PRODUCT DATA :
| Colour | Pink, Grey & Red |
|---|---|
| Finish | Matt |
| Applciation | Air Spray, Brush |
| Volume Solids | Approx. 40% |
| Recommended DFT/COAT | 25-30 Microns |
| THEORITICAL SPREADING RATE | |
| At Above DFT | 16.00 - 13.00 M2 /Ltr at above DFT |
| Surface Dry | 1 hour at 30º C |
| Hard Dry | 12 hour |
| Over Coating Interval | Min: 12 Hrs. Max No limit |
| Flash Point | Above 30°C |
| Thinner | Synthetic Thinner |
Surface Preparation
Surface coat to be dry and free from all surface contaminations. Preferably to be blast cleaned to Sa 2½ of Swedish specification. If blast cleaning is not possible, remove loose contaminations by power/hand tools.
Health & Safety
As a general rule, avoid inhalation of solvent vapour or paint mist and contact of paint with skin and eyes. Provide forced ventilation when working with solvent born coating in confined spaces or stagnant. Skin and eye protection follow the local and national regulations