Glo-Protect ToughEx 229
General Finishing Coat
Glo-Protek ToughEx 229 is a single pack, air-drying, Modified Oleo-Resinous and Alkyd based color coating specially designed paint which offers a tough & hard wearing coating resistant to abrasion, resistance to corrosion, fresh water, lubricating oil etc.
TYPICAL USE:
As a interior finishing coat for protection of steel structure, grills-doors. Strongly suggested for vehicles underbody, radiators, brake components, allied components, chassis etc.
TECHNICAL DATA
Colour | Black, Grey and Industrial Colors |
---|---|
Finish | Egg Shell Finish |
Application | Air Spray, Brush |
Volume Solids | Approx. 38% |
Recommended DFT/COAT | 20-25 Microns |
THEORITICAL SPREADING RATE | |
At Above DFT | Approx 16.00-12.80 M2 /Ltr at above DFT |
Surface Dry | 1 hours at 30º C |
Hard Dry | 24 Hrs. or stove at 100 º C for 15-20 minutes |
Overcoating Interval | Min. : 24 hrs. Max. : No limit |
Flash Point | Above 30° C |
Thinner | Synthetic Thinner |
Surface Preparation
Surface coat to be dry and free from all surface contaminations. Preferably to be blast cleaned to Sa 2½ of Swedish specification. If blast cleaning is not possible, remove loose contaminations by power/hand tools.
Health & Safety
As a general rule, avoid inhalation of solvent vapour or paint mist and contact of paint with skin and eyes. Provide forced ventilation when working with solvent born coating in confined spaces or stagnant air. Skin and eye protection follow the local and national regulations.